HobbyKing SimonK flashed F-30A 30A ESC with 5V 3A BEC
This is THE BEST 30A ESC for multicopters! Combined with the SimonK firmware, it provides the best combination of hardware and software. I have personally used this to build an Octocopter and I can highly recommend it. They are ideal for any tricopter, quadcopter, hexacopter, etc., where high refresh rate is needed.
Read below to understand why this ESC is the best:
ESC Specs:
NOTE: Before you buy, you should make yourself familiar with the somewhat experimental nature of the SimonK firmware. This software pushes the motor response to the limit, so there may be motor and prop combinations that won't work. Due to the lack of overcurrent/overheat/low voltage sensing (needed for multirotors), it's easier to destroy the ESC and possibly the motor too. I can't tell you what will or won't work, other than the motors I sell that I've personally used, so please consult the main SimonK threads on various forums for more info. Neither I, nor SimonK will be responsible for any damage that may occur, so know and accept the risks before using these. That said, I've personally had fantastic results with this firmware and wouldn't use anything else!
Get it fast! USA shipper located near DALLAS, TX. Don't wait 3+ weeks for shipments from China!
Read below to understand why this ESC is the best:
- Highest efficiency 100% N-FET design.
- Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
- No low voltage cutoff, because any cutoff in a multirotor = crash.
- No over temp cutoff, because any cutoff in a multirotor = crash.
- Super high refresh rate, no buffering of the input signal, resulting in up to or beyond 400Hz to 490Hz response rate.
- 16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
- Super simple, foolproof operation! Nothing to program other than the throttle range.
- Don't buy a 30A multirotor ESC that doesn't meet all these criteria! There are a lot of low quality 30A ESC out there!
ESC Specs:
- Max cont. current: 30A
- Peak current: 40A (10s)
- Voltage: 2-4S lipo, 5-12 Nicad
- BEC: 5V/3A (Note that these are BEC, not UBEC or SBEC, they are all labelled wrong from HobbyKing)
- Size: 54x26x11mm
- Weight: ~30g
NOTE: Before you buy, you should make yourself familiar with the somewhat experimental nature of the SimonK firmware. This software pushes the motor response to the limit, so there may be motor and prop combinations that won't work. Due to the lack of overcurrent/overheat/low voltage sensing (needed for multirotors), it's easier to destroy the ESC and possibly the motor too. I can't tell you what will or won't work, other than the motors I sell that I've personally used, so please consult the main SimonK threads on various forums for more info. Neither I, nor SimonK will be responsible for any damage that may occur, so know and accept the risks before using these. That said, I've personally had fantastic results with this firmware and wouldn't use anything else!
Get it fast! USA shipper located near DALLAS, TX. Don't wait 3+ weeks for shipments from China!
BUY NOW! Fast USA shipping! Get it in just a few days!
Click below to buy now. You can change quantity at checkout. Thanks!
